Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 42mm Frame,

RS Stock No.: 877-7247Brand: Applied Motion SystemsManufacturers Part No.: STM23IP-2EE
brand-logo
View all in Stepper Motors

Technical Document

Specifications

Stepper Motor Type

Dual Hybridge

Step Angle

1.8°

Holding Torque

0.88Nm

Number Of Wires

8

Supply Voltage

12 → 70 V

Frame Size

42mm

Shaft Diameter

6.35mm

Current Rating

5 A

Shaft Length

18.4mm

Depth

92.4mm

Output Speed

200 → 51200 spm

Standards Met

CE EN61800-3:2004, RoHS Compliant

Series

STM

Country of Origin

United States

Product details

Integrated Steppers STM23IP

The STM23IP is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions.


Drive + Motor + Control in one unit
4 quadrant controller
Dynamic Current Control
Anti-Resonance
Torque Ripple Smoothing
Microstep Emulation
Stall Prevention/Detection
NEMA 23 frame size
Input voltage 12-70 Vdc
3 digital input, 1 analog input
1 digital output
Ethernet and Ethernet/IP interface
Encoder


Operation Mode:
Step and direction
CW/CCW pulse
A/B quadrature pulse
velocity (oscillator, joystick)
streaming commands (SCL)
SiNet Hub compatible
Executes stored Q programmes

Applied Motion Systems - Stepper Motor

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 1,473.45

Each (Exc. Vat)

€ 1,738.67

Each (Including VAT)

Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 42mm Frame,

€ 1,473.45

Each (Exc. Vat)

€ 1,738.67

Each (Including VAT)

Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 42mm Frame,
Stock information temporarily unavailable.

Technical Document

Specifications

Stepper Motor Type

Dual Hybridge

Step Angle

1.8°

Holding Torque

0.88Nm

Number Of Wires

8

Supply Voltage

12 → 70 V

Frame Size

42mm

Shaft Diameter

6.35mm

Current Rating

5 A

Shaft Length

18.4mm

Depth

92.4mm

Output Speed

200 → 51200 spm

Standards Met

CE EN61800-3:2004, RoHS Compliant

Series

STM

Country of Origin

United States

Product details

Integrated Steppers STM23IP

The STM23IP is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions.


Drive + Motor + Control in one unit
4 quadrant controller
Dynamic Current Control
Anti-Resonance
Torque Ripple Smoothing
Microstep Emulation
Stall Prevention/Detection
NEMA 23 frame size
Input voltage 12-70 Vdc
3 digital input, 1 analog input
1 digital output
Ethernet and Ethernet/IP interface
Encoder


Operation Mode:
Step and direction
CW/CCW pulse
A/B quadrature pulse
velocity (oscillator, joystick)
streaming commands (SCL)
SiNet Hub compatible
Executes stored Q programmes

Applied Motion Systems - Stepper Motor