Technical Document
Specifications
Product details
Arty Z7 Zynq-7000 Development Board
The Arty Z7-20 is a development platform designed around the Xilinx Zynq-7000™ All Programmable System-on-Chip (AP SoC). The Zynq-7000 architecture integrates a dual-core, 650MHz ARM Cortex-A9 processor with Artix-7 series FPGA logic. This pairing surrounds a powerful processor with a unique set of software defined peripherals and controllers. The Vivado, Petalinux, and SDSoC toolsets each provide a path between defining your custom peripheral set and bringing its functionality up to a Linux OS or 'bare-metal' program running on the processor.
Xilinx Zynq-7000 (XC7Z020-1CLG400C)
Processor: 650MHz dual ARM Cortex-A9 core
Look-up Tables (LUTs): 53200
Flip-flops: 106400
Block RAM: 630KB
Clock Management Tiles: 4
Available Shield I/O: 49
DDR3 memory controller with 8 x DMA channels and 4 x AXI3 Slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controller: SPI, UART, CAN, I²C
Programmable from JTAG, Quad-SPI Flash or microSD card
Programmable logic equivalent to Artix-7 FPGA Memory
Board Memory and Power
On-board IS43TR16256A-125KBL 512MB DDR3 SDRAM with 16-bit bus @ 1050Mbps
On-board S25FL128S 16MB Quad-SPI Flash with 48-bit unique EUI-48/64™ compatible identifier
microSD card slot
Powered from USB or +7V to +15Vdc via barrel jack
System Connectivity
10/100/1000 Ethernet via RJ45 connector
USB-UART Bridge via micro-B socket
USB-JTAG Programming via micro-B socket
USB OTG PHY (supports Host only) via USB-A socket
Audio and Video
HDMI sink port (input)
HDMI source port (output)
PWM driven mono audio output via 3.5mm jack socket
Switches and LEDs
Reset and Program pushbuttons
4 x User pushbuttons
2 x User slide-switches
4 x User LEDs
2 x User RGB LEDs
Expansion Connectors
chipKIT/Arduino R3 Shield headers
2 x Standard 12-pin Pmod™ connectors
Stock information temporarily unavailable.
Please check again later.
€ 647.92
Each (Exc. Vat)
€ 764.55
Each (Including VAT)
1
€ 647.92
Each (Exc. Vat)
€ 764.55
Each (Including VAT)
1
Technical Document
Specifications
Product details
Arty Z7 Zynq-7000 Development Board
The Arty Z7-20 is a development platform designed around the Xilinx Zynq-7000™ All Programmable System-on-Chip (AP SoC). The Zynq-7000 architecture integrates a dual-core, 650MHz ARM Cortex-A9 processor with Artix-7 series FPGA logic. This pairing surrounds a powerful processor with a unique set of software defined peripherals and controllers. The Vivado, Petalinux, and SDSoC toolsets each provide a path between defining your custom peripheral set and bringing its functionality up to a Linux OS or 'bare-metal' program running on the processor.
Xilinx Zynq-7000 (XC7Z020-1CLG400C)
Processor: 650MHz dual ARM Cortex-A9 core
Look-up Tables (LUTs): 53200
Flip-flops: 106400
Block RAM: 630KB
Clock Management Tiles: 4
Available Shield I/O: 49
DDR3 memory controller with 8 x DMA channels and 4 x AXI3 Slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controller: SPI, UART, CAN, I²C
Programmable from JTAG, Quad-SPI Flash or microSD card
Programmable logic equivalent to Artix-7 FPGA Memory
Board Memory and Power
On-board IS43TR16256A-125KBL 512MB DDR3 SDRAM with 16-bit bus @ 1050Mbps
On-board S25FL128S 16MB Quad-SPI Flash with 48-bit unique EUI-48/64™ compatible identifier
microSD card slot
Powered from USB or +7V to +15Vdc via barrel jack
System Connectivity
10/100/1000 Ethernet via RJ45 connector
USB-UART Bridge via micro-B socket
USB-JTAG Programming via micro-B socket
USB OTG PHY (supports Host only) via USB-A socket
Audio and Video
HDMI sink port (input)
HDMI source port (output)
PWM driven mono audio output via 3.5mm jack socket
Switches and LEDs
Reset and Program pushbuttons
4 x User pushbuttons
2 x User slide-switches
4 x User LEDs
2 x User RGB LEDs
Expansion Connectors
chipKIT/Arduino R3 Shield headers
2 x Standard 12-pin Pmod™ connectors