Technical Document
Specifications
Number of Elements per Chip
1
Schmitt Trigger Input
Yes
Minimum Operating Temperature
-55 °C
Propagation Delay Test Condition
50pF
Pin Count
5
Maximum High Level Output Current
-32mA
Mounting Type
Surface Mount
Maximum Operating Temperature
+125 °C
Input Type
Schmitt Trigger
Logic Family
LCX
Maximum Low Level Output Current
32mA
Logic Function
Inverter
Minimum Operating Supply Voltage
1.65 V
Height
0.6mm
Width
1.3mm
Output Type
Single Ended
Length
1.7mm
Maximum Operating Supply Voltage
5.5 V
Package Type
SOT-553
Maximum Propagation Delay Time @ Maximum CL
7.5 ns @ 50 pF
Dimensions
1.7 x 1.3 x 0.6mm
Batteries
3 x AAA BatteryCountry of Origin
Malaysia
Product details
SPM6530 Series Magnetically Shielded Wire Wound Inductors
SPM6530 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"
TDK Non Standard SMT Inductors (Chokes)
Stock information temporarily unavailable.
Please check again later.
P.O.A.
4000
P.O.A.
4000
Technical Document
Specifications
Number of Elements per Chip
1
Schmitt Trigger Input
Yes
Minimum Operating Temperature
-55 °C
Propagation Delay Test Condition
50pF
Pin Count
5
Maximum High Level Output Current
-32mA
Mounting Type
Surface Mount
Maximum Operating Temperature
+125 °C
Input Type
Schmitt Trigger
Logic Family
LCX
Maximum Low Level Output Current
32mA
Logic Function
Inverter
Minimum Operating Supply Voltage
1.65 V
Height
0.6mm
Width
1.3mm
Output Type
Single Ended
Length
1.7mm
Maximum Operating Supply Voltage
5.5 V
Package Type
SOT-553
Maximum Propagation Delay Time @ Maximum CL
7.5 ns @ 50 pF
Dimensions
1.7 x 1.3 x 0.6mm
Batteries
3 x AAA BatteryCountry of Origin
Malaysia
Product details
SPM6530 Series Magnetically Shielded Wire Wound Inductors
SPM6530 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"