SKF HK 0408 4mm I.D Needle Roller Bearing, 8mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
4mm
Outside Diameter
8mm
Roller Bearing Type
Needle
Race Width
8mm
Bore Type
Parallel
Material
Metal
Static Load Rating
1.37kN
Cage Material
Sheet Steel
Number of Rows
1
Roller Material
Steel
Dynamic Load Rating
1.76kN
End Type
Open
Reference Speed
22000rpm
Limiting Speed
26000rpm
Maximum Speed - Grease
26000rpm
Maximum Speed - Oil
38000rpm
Fatigue Limit Load
140N
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Stock information temporarily unavailable.
Please check again later.
€ 7.65
Each (Exc. VAT)
€ 9.03
Each (inc. VAT)
1
€ 7.65
Each (Exc. VAT)
€ 9.03
Each (inc. VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | € 7.65 |
| 5 - 9 | € 7.47 |
| 10 - 24 | € 7.44 |
| 25+ | € 7.38 |
Technical Document
Specifications
Brand
SKFInside Diameter
4mm
Outside Diameter
8mm
Roller Bearing Type
Needle
Race Width
8mm
Bore Type
Parallel
Material
Metal
Static Load Rating
1.37kN
Cage Material
Sheet Steel
Number of Rows
1
Roller Material
Steel
Dynamic Load Rating
1.76kN
End Type
Open
Reference Speed
22000rpm
Limiting Speed
26000rpm
Maximum Speed - Grease
26000rpm
Maximum Speed - Oil
38000rpm
Fatigue Limit Load
140N
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required