Baumer GI355 Series Optical Incremental Encoder, 1024 ppr, HTL/Push Pull Signal, Solid Type, 10mm Shaft

RS Stock No.: 481-7391Brand: BaumerManufacturers Part No.: GI355.070R023 (GI355.070C323)IMPA: 0
brand-logo
View all in Motion Control Sensors

Technical Document

Specifications

Encoder Technology

Optical

Output Signal Type

HTL/Push Pull

Maximum Revolutions

10000rpm

Shaft Type

Solid

IP Rating

IP54

Shaft Diameter

10mm

Mounting Type

Clamping Flange

Minimum Operating Temperature

-25°C

Pulses Per Revolution

1024

Maximum Operating Temperature

+85°C

Overall Width

58mm

Switching Frequency

≤150 kHz

Supply Voltage

4.75 → 30 V dc

Brand

Baumer

Connection Type

Flange connector M23

Series

GI355

Country of Origin

Germany

Product details

EL Series EL155, EL183, EL301, EL302, EL303 and EL561 Single Output PSUs

Separate 3 digit 14mm voltage and current meters
Constant voltage or constant current operation
New safety terminals accept fixed shroud 4mm plugs plus forks and wires
DC output switch enables voltage/current setup with load disconnected
Low ripple and noise
Supplied with mains lead and instructions

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 541.80

Each (Exc. Vat)

€ 639.32

Each (Including VAT)

Baumer GI355 Series Optical Incremental Encoder, 1024 ppr, HTL/Push Pull Signal, Solid Type, 10mm Shaft

1

Available in multiples of 1
1€ 541.80
2€ 1,083.60
3€ 1,625.40
4€ 2,167.20
5€ 2,709.00
6€ 3,250.80
7€ 3,792.60
8€ 4,334.40
9€ 4,876.20
10€ 5,418.00
11€ 5,959.80
12€ 6,501.60
13€ 7,043.40
14€ 7,585.20
15€ 8,127.00
sticker-719

€ 541.80

Each (Exc. Vat)

€ 639.32

Each (Including VAT)

Baumer GI355 Series Optical Incremental Encoder, 1024 ppr, HTL/Push Pull Signal, Solid Type, 10mm Shaft
Stock information temporarily unavailable.

1

Available in multiples of 1
1€ 541.80
2€ 1,083.60
3€ 1,625.40
4€ 2,167.20
5€ 2,709.00
6€ 3,250.80
7€ 3,792.60
8€ 4,334.40
9€ 4,876.20
10€ 5,418.00
11€ 5,959.80
12€ 6,501.60
13€ 7,043.40
14€ 7,585.20
15€ 8,127.00
sticker-719

Technical Document

Specifications

Encoder Technology

Optical

Output Signal Type

HTL/Push Pull

Maximum Revolutions

10000rpm

Shaft Type

Solid

IP Rating

IP54

Shaft Diameter

10mm

Mounting Type

Clamping Flange

Minimum Operating Temperature

-25°C

Pulses Per Revolution

1024

Maximum Operating Temperature

+85°C

Overall Width

58mm

Switching Frequency

≤150 kHz

Supply Voltage

4.75 → 30 V dc

Brand

Baumer

Connection Type

Flange connector M23

Series

GI355

Country of Origin

Germany

Product details

EL Series EL155, EL183, EL301, EL302, EL303 and EL561 Single Output PSUs

Separate 3 digit 14mm voltage and current meters
Constant voltage or constant current operation
New safety terminals accept fixed shroud 4mm plugs plus forks and wires
DC output switch enables voltage/current setup with load disconnected
Low ripple and noise
Supplied with mains lead and instructions