Chauvin Arnoux PEL103 Power & Energy Data Logger, Bluetooth, Ethernet, USB
Technical Document
Specifications
Brand
Chauvin ArnouxNumber Of Input Channels
7
Model Number
PEL103
Measurement Parameters
Current, Energy, Frequency, Harmonics, Power, Voltage
Sensor Type
Current Sensor, Voltage Probes
Interface Type
Bluetooth, Ethernet, USB
Data Logger Type
Power & Energy
Maximum Voltage Measurement
1000V ac/dc
Power Source
Mains
IP Rating
IP54
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Maximum Current Measurement
10 kA ac, 1,4 kA dc
Display Type
LCD
Best Current Measurement Accuracy
±0,5 %, ±1,2 %, ±1,7 %, ±3,2 %
Includes
1 bag, 1 mains cable, 1 safety datasheet, 1 SD card, 1 SD-USB adapter, 1 set of inserts/rings, 1 USB cable, 4 black crocodile clips, 4 x 3 m black silicone cables straight banana / straight banana, operating manual on CD, PEL Transfer PC software, quick start-up guide
Battery Type
Rechargeable Battery
Best Voltage Measurement Accuracy
±0,2 %
Country of Origin
France
Product details
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III
Stock information temporarily unavailable.
Please check again later.
€ 3,042.36
Each (Exc. VAT)
€ 3,589.98
Each (inc. VAT)
1
€ 3,042.36
Each (Exc. VAT)
€ 3,589.98
Each (inc. VAT)
1
Technical Document
Specifications
Brand
Chauvin ArnouxNumber Of Input Channels
7
Model Number
PEL103
Measurement Parameters
Current, Energy, Frequency, Harmonics, Power, Voltage
Sensor Type
Current Sensor, Voltage Probes
Interface Type
Bluetooth, Ethernet, USB
Data Logger Type
Power & Energy
Maximum Voltage Measurement
1000V ac/dc
Power Source
Mains
IP Rating
IP54
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Maximum Current Measurement
10 kA ac, 1,4 kA dc
Display Type
LCD
Best Current Measurement Accuracy
±0,5 %, ±1,2 %, ±1,7 %, ±3,2 %
Includes
1 bag, 1 mains cable, 1 safety datasheet, 1 SD card, 1 SD-USB adapter, 1 set of inserts/rings, 1 USB cable, 4 black crocodile clips, 4 x 3 m black silicone cables straight banana / straight banana, operating manual on CD, PEL Transfer PC software, quick start-up guide
Battery Type
Rechargeable Battery
Best Voltage Measurement Accuracy
±0,2 %
Country of Origin
France
Product details
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III