LCBSB-3-01A2-RT, 4.8mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base
Technical Document
Specifications
Brand
EssentraOverall Height
15mm
PCB Support Type
Adhesive-Backed Support
Body Height
4.8mm
Support Base Dimensions
17.8 x 17.8mm
PCB Hole Diameter
4mm
PCB Thickness
1.6mm
Material
Nylon
Support Base Length
17.8mm
Support Base Width
17.8mm
Country of Origin
United Kingdom
Product details
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
Stock information temporarily unavailable.
Please check again later.
€ 0.51
Each (In a Pack of 40) (Exc. VAT)
€ 0.602
Each (In a Pack of 40) (inc. VAT)
40
€ 0.51
Each (In a Pack of 40) (Exc. VAT)
€ 0.602
Each (In a Pack of 40) (inc. VAT)
40
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 40 - 360 | € 0.51 | € 20.40 |
| 400 - 760 | € 0.48 | € 19.20 |
| 800 - 1960 | € 0.48 | € 19.20 |
| 2000+ | € 0.45 | € 18.00 |
Technical Document
Specifications
Brand
EssentraOverall Height
15mm
PCB Support Type
Adhesive-Backed Support
Body Height
4.8mm
Support Base Dimensions
17.8 x 17.8mm
PCB Hole Diameter
4mm
PCB Thickness
1.6mm
Material
Nylon
Support Base Length
17.8mm
Support Base Width
17.8mm
Country of Origin
United Kingdom
Product details
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm