Technical Document
Specifications
Number of Receivers
1
Power Supply Type
Dual
Number of Transmitters
1
Maximum Operating Temperature
+70 °C
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Pin Count
80
Typical Dual Supply Voltage
1.95 V, 3.3 V
Interface Standards
IEEE 1394-1995, IEEE 1394a-2000
Height
1mm
Length
12mm
Width
12mm
Package Type
HTQFP
Brand
Texas InstrumentsDimensions
12 x 12 x 1mm
Product details
Flying leads adaptor for USB-II Platform Cable, Xilinx
The adaptor makes possible to use flying wires for connections to distributed terminals on a target system.
The adaptor is a small circuit board with two connectors.
The connector on the bottom side of the adapter mates with the 14-pin Platform Cable USB II male 2-mm connector. A 7-pin right-angle header on the top side of the adapter mates with the standard Xilinx flying wire set.
Flying Leads : Provide pins on your printed circuit board for your desired configuration mode. For example, Boundary-Scan configuration would require VCC, GND, TCK, TDO, TDI and TMS header pins. Each lead is labeled to identify the proper pin connection.
Programmable Logic Programming
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
![sticker-719](https://cms.rsdelivers.com/repository-v1/Heavy Label 1.jpg)
P.O.A.
1
![sticker-719](https://cms.rsdelivers.com/repository-v1/Heavy Label 1.jpg)
Technical Document
Specifications
Number of Receivers
1
Power Supply Type
Dual
Number of Transmitters
1
Maximum Operating Temperature
+70 °C
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Pin Count
80
Typical Dual Supply Voltage
1.95 V, 3.3 V
Interface Standards
IEEE 1394-1995, IEEE 1394a-2000
Height
1mm
Length
12mm
Width
12mm
Package Type
HTQFP
Brand
Texas InstrumentsDimensions
12 x 12 x 1mm
Product details
Flying leads adaptor for USB-II Platform Cable, Xilinx
The adaptor makes possible to use flying wires for connections to distributed terminals on a target system.
The adaptor is a small circuit board with two connectors.
The connector on the bottom side of the adapter mates with the 14-pin Platform Cable USB II male 2-mm connector. A 7-pin right-angle header on the top side of the adapter mates with the standard Xilinx flying wire set.
Flying Leads : Provide pins on your printed circuit board for your desired configuration mode. For example, Boundary-Scan configuration would require VCC, GND, TCK, TDO, TDI and TMS header pins. Each lead is labeled to identify the proper pin connection.