3M, SC Single Mode Fibre Optic Connector, 0.3dB Insertion Loss

RS Stock No.: 915-6014Brand: 3MManufacturers Part No.: 80-6113-2622-6
brand-logo
View all in Fibre Optic Connectors

Technical Document

Specifications

Brand

3M

Connector Type

SC

Single/Multimode

Single Mode

Insertion Loss

0.3dB

Colour

Blue

Maximum Operating Temperature

+75°C

Minimum Operating Temperature

-40°C

Product details

3M No Polish Connectors

From 3M, a series of no polish fibre optic connectors. These fibre optic connectors are field installable allowing for convenient fast on-site termination of 250 μm and 900 μm connections. The connectors are made up of a factory polished fibre/ ferrule and mechanical splice which is installed with a simple field tool. The SC connectors have bell shaped boots already attached, decreasing the chance of losing or forgetting to terminate during connection. The ST and LC versions have a streamlined version of this boot also minimising the same risk.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

3M, SC Single Mode Fibre Optic Connector, 0.3dB Insertion Loss

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

3M, SC Single Mode Fibre Optic Connector, 0.3dB Insertion Loss
Stock information temporarily unavailable.

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Technical Document

Specifications

Brand

3M

Connector Type

SC

Single/Multimode

Single Mode

Insertion Loss

0.3dB

Colour

Blue

Maximum Operating Temperature

+75°C

Minimum Operating Temperature

-40°C

Product details

3M No Polish Connectors

From 3M, a series of no polish fibre optic connectors. These fibre optic connectors are field installable allowing for convenient fast on-site termination of 250 μm and 900 μm connections. The connectors are made up of a factory polished fibre/ ferrule and mechanical splice which is installed with a simple field tool. The SC connectors have bell shaped boots already attached, decreasing the chance of losing or forgetting to terminate during connection. The ST and LC versions have a streamlined version of this boot also minimising the same risk.