Adafruit FeatherWing Add-On Board for ATmega32u4, ATSAM M0, ESP8266 for All Feather Board
Technical Document
Specifications
Brand
ADAFRUIT INDUSTRIESFor Use With
All Feather Board
Kit Classification
Add On Board
Featured Device
ATmega32u4, ATSAM M0, ESP8266
Kit Name
FeatherWing Add-On Board
Country of Origin
United States
Product details
DC Motor / Stepper Motor FeatherWing
FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.
The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.
You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.
- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g
Adafruit FeatherWing Add-On Boards
Stock information temporarily unavailable.
Please check again later.
€ 38.85
Each (Exc. Vat)
€ 45.84
Each (Including VAT)
1
€ 38.85
Each (Exc. Vat)
€ 45.84
Each (Including VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | € 38.85 |
| 5 - 9 | € 35.28 |
| 10+ | € 32.06 |
Technical Document
Specifications
Brand
ADAFRUIT INDUSTRIESFor Use With
All Feather Board
Kit Classification
Add On Board
Featured Device
ATmega32u4, ATSAM M0, ESP8266
Kit Name
FeatherWing Add-On Board
Country of Origin
United States
Product details
DC Motor / Stepper Motor FeatherWing
FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.
The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.
You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.
- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g