Rockwell Automation Dual-Channel Safety Mat/Edge Safety Relay, 24 V dc, 110 → 230V ac, 2 Safety Contacts
Technical Document
Specifications
Brand
Rockwell AutomationSupply Voltage
24 V dc, 110 → 230V ac
Number of Channels
2
Safety Contacts
2
Function
Safety Mat/Edge
Auxiliary Contacts
1
Reset Method
Automatic & Manual
Range
Safedge
Safety Category ISO 13849-1
3
Safety Category (ISO 13849-1)
3
PL ISO 13849-1
d
PL (ISO 13849-1)
d
Series
440F
Depth
120mm
Width
45.5mm
Performance Level
d
Length
73mm
Country of Origin
Dominican Republic
Product details
Rockwell Automation 440F Safedge Controller, DIN mount
Complete your Safedge System with the Safedge Control Unit and provide superior protection for personnel in hazardous areas. This device works as part of the touch sensing safety system, which is designed to prevent injury to personnel by detecting pressure on the safety profile that is secured to the dangerous area or object.
The controller monitors the circuit via the profile and when normal run conditions are detected it sends a signal to the machine control circuit. When the profile is pressed from any direction through 90° this causes the top conductive rubber strip to compress, which then touches the middle conductive rubber. This creates a “short circuit” which reduces the overall resistance. The controller checks for this and commences the machine shutdown. It also detects any faults in the profile or the wiring connections to the profile and will change the control unit outputs to a safe (OFF) state.
With a complete Safedge system all corner and straight connectors are "active" components, to ensure that there are no "dead" zones. This device is EC type approved when Safedge profiles are used with the Safedge Command Unit.
Stock information temporarily unavailable.
Please check again later.
€ 877.35
Each (Exc. Vat)
€ 1,035.27
Each (Including VAT)
1
€ 877.35
Each (Exc. Vat)
€ 1,035.27
Each (Including VAT)
1
Technical Document
Specifications
Brand
Rockwell AutomationSupply Voltage
24 V dc, 110 → 230V ac
Number of Channels
2
Safety Contacts
2
Function
Safety Mat/Edge
Auxiliary Contacts
1
Reset Method
Automatic & Manual
Range
Safedge
Safety Category ISO 13849-1
3
Safety Category (ISO 13849-1)
3
PL ISO 13849-1
d
PL (ISO 13849-1)
d
Series
440F
Depth
120mm
Width
45.5mm
Performance Level
d
Length
73mm
Country of Origin
Dominican Republic
Product details
Rockwell Automation 440F Safedge Controller, DIN mount
Complete your Safedge System with the Safedge Control Unit and provide superior protection for personnel in hazardous areas. This device works as part of the touch sensing safety system, which is designed to prevent injury to personnel by detecting pressure on the safety profile that is secured to the dangerous area or object.
The controller monitors the circuit via the profile and when normal run conditions are detected it sends a signal to the machine control circuit. When the profile is pressed from any direction through 90° this causes the top conductive rubber strip to compress, which then touches the middle conductive rubber. This creates a “short circuit” which reduces the overall resistance. The controller checks for this and commences the machine shutdown. It also detects any faults in the profile or the wiring connections to the profile and will change the control unit outputs to a safe (OFF) state.
With a complete Safedge system all corner and straight connectors are "active" components, to ensure that there are no "dead" zones. This device is EC type approved when Safedge profiles are used with the Safedge Command Unit.