Chauvin Arnoux B102 Current Clamp, AC Adapter, 400 A AC Max, Current Output
Technical Document
Specifications
Brand
Chauvin ArnouxAdapter Type
AC
Product Type
Current Clamp
Maximum AC Current
400A
Accuracy
≤ 0.35 %
Maximum Conductor Size
112 mm
Cable Length
1.5m
Output Type
Current
Connector Type
4 mm Plug
Battery Type
LR6, Alkaline, AA
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
55°C
Model Number
B102
Standards/Approvals
No
Safety Category Level
CAT III, CAT IV
Safety Category Voltage
500V
Country of Origin
France
Product details
B102 Leakage Current Clamp
The B102 current clamp is designed for measuring leakage current diverted towards the earth. It enables the fault to be located or anticipated without disconnecting the equipment linked. The current clamp is specially designed to detect low fault currents on power circuits.
The measurements can be made on any type of installation: single-phase, 3 or 4 wire threephase, balanced or not, with the neutral grounded earth or impedant
Differential or leakage current, from 500 μA
Current up to 400 A max
2 measurement ranges: 4 A AC / 400 A AC
Bandwidth: 48 Hz to 1000 Hz
Output: 1.5 m cord with double insulation having male safety plugs 4mm in diameter
Stock information temporarily unavailable.
€ 2,471.75
€ 2,471.75 Each (Exc. VAT)
€ 2,916.67
€ 2,916.67 Each (inc. VAT)
1
€ 2,471.75
€ 2,471.75 Each (Exc. VAT)
€ 2,916.67
€ 2,916.67 Each (inc. VAT)
Stock information temporarily unavailable.
1
Technical Document
Specifications
Brand
Chauvin ArnouxAdapter Type
AC
Product Type
Current Clamp
Maximum AC Current
400A
Accuracy
≤ 0.35 %
Maximum Conductor Size
112 mm
Cable Length
1.5m
Output Type
Current
Connector Type
4 mm Plug
Battery Type
LR6, Alkaline, AA
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
55°C
Model Number
B102
Standards/Approvals
No
Safety Category Level
CAT III, CAT IV
Safety Category Voltage
500V
Country of Origin
France
Product details
B102 Leakage Current Clamp
The B102 current clamp is designed for measuring leakage current diverted towards the earth. It enables the fault to be located or anticipated without disconnecting the equipment linked. The current clamp is specially designed to detect low fault currents on power circuits.
The measurements can be made on any type of installation: single-phase, 3 or 4 wire threephase, balanced or not, with the neutral grounded earth or impedant
Differential or leakage current, from 500 μA
Current up to 400 A max
2 measurement ranges: 4 A AC / 400 A AC
Bandwidth: 48 Hz to 1000 Hz
Output: 1.5 m cord with double insulation having male safety plugs 4mm in diameter