Digilent 410-319 Arty Artix-7 Development Board

RS Stock No.: 134-6478Brand: DigilentManufacturers Part No.: 410-319
brand-logo
View all in FPGA Development Tools

Technical Document

Specifications

Programmable Logic Technology

FPGA

Kit Classification

Development Board

Kit Name

Arty Artix-7

Product details

Arty Artix-7 FPGA Development Board

Arty is a development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. Arty was designed specifically for use as a MicroBlaze Soft Processing System.

Xilinx Artix-7 FPGA (XC7A35T-1CSG324-1L)

• 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops)
• 1800Kbit Fast Block RAM
• 5 x Clock Management Tiles, each with a phase-locked loop (PLL)
• 90 x DSP slices
• Internal clock speeds exceeding 450MHz
• On-chip Analogue-to-Digital Converter (XADC)
• Programmable over JTAG and Quad-SPI Flash

Board Memory and Power

• 256MB DDR3L SDRAM with 16-bit bus @ 667MHz
• 16MB Quad-SPI Flash memory
• USB-JTAG Programming circuit
• Powered from USB connector or +7V to +15Vdc barrel jack socket

System Connectivity

• 10/100 Ethernet via RJ45 connector
• USB-UART Bridge via microUSB socket

Switches and LEDs

• 4 x User Slide-Switches
• 4 x User Pushbuttons
• Reset Pushbutton
• Status LEDs: Power-on, FPGA programming status and USB/Ethernet port status
• 4 x User LEDs
• 4 x User RGB LEDs

Expansion Connectors

• 2 x Standard Pmod™ 2 x 6-pin connectors
• 2 x High-Speed Pmod™ 2 x 6-pin connectors
• chipKIT/Arduino R3 Shield headers

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Digilent 410-319 Arty Artix-7 Development Board

P.O.A.

Digilent 410-319 Arty Artix-7 Development Board
Stock information temporarily unavailable.

Technical Document

Specifications

Programmable Logic Technology

FPGA

Kit Classification

Development Board

Kit Name

Arty Artix-7

Product details

Arty Artix-7 FPGA Development Board

Arty is a development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. Arty was designed specifically for use as a MicroBlaze Soft Processing System.

Xilinx Artix-7 FPGA (XC7A35T-1CSG324-1L)

• 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops)
• 1800Kbit Fast Block RAM
• 5 x Clock Management Tiles, each with a phase-locked loop (PLL)
• 90 x DSP slices
• Internal clock speeds exceeding 450MHz
• On-chip Analogue-to-Digital Converter (XADC)
• Programmable over JTAG and Quad-SPI Flash

Board Memory and Power

• 256MB DDR3L SDRAM with 16-bit bus @ 667MHz
• 16MB Quad-SPI Flash memory
• USB-JTAG Programming circuit
• Powered from USB connector or +7V to +15Vdc barrel jack socket

System Connectivity

• 10/100 Ethernet via RJ45 connector
• USB-UART Bridge via microUSB socket

Switches and LEDs

• 4 x User Slide-Switches
• 4 x User Pushbuttons
• Reset Pushbutton
• Status LEDs: Power-on, FPGA programming status and USB/Ethernet port status
• 4 x User LEDs
• 4 x User RGB LEDs

Expansion Connectors

• 2 x Standard Pmod™ 2 x 6-pin connectors
• 2 x High-Speed Pmod™ 2 x 6-pin connectors
• chipKIT/Arduino R3 Shield headers