Kubler SK 07.1 Counter, 7 Digit, 10Hz, 12 V dc
Technical Document
Specifications
Brand
KublerSupply Voltage
12 V dc
Count Mode
Impulses
Input Type
Voltage
Function
Counter
Connection Type
Clamp
Reset Method
No Reset
Number Of Digits
7
Mounting Type
DIN Rail
Count Direction
Up
Digit Height
4 mm
Maximum Count Frequency
10Hz
Weight
55g
Maximum Operating Temperature
+60°C
Minimum Operating Temperature
-10°C
Series
SK 07.1
Country of Origin
Germany
Product details
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
€ 60.84
€ 60.84 Each (Exc. VAT)
€ 71.79
€ 71.79 Each (inc. VAT)
1
€ 60.84
€ 60.84 Each (Exc. VAT)
€ 71.79
€ 71.79 Each (inc. VAT)
Stock information temporarily unavailable.
1
Stock information temporarily unavailable.
Technical Document
Specifications
Brand
KublerSupply Voltage
12 V dc
Count Mode
Impulses
Input Type
Voltage
Function
Counter
Connection Type
Clamp
Reset Method
No Reset
Number Of Digits
7
Mounting Type
DIN Rail
Count Direction
Up
Digit Height
4 mm
Maximum Count Frequency
10Hz
Weight
55g
Maximum Operating Temperature
+60°C
Minimum Operating Temperature
-10°C
Series
SK 07.1
Country of Origin
Germany
Product details
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.