Microchip RN2903A-I/RM098 RF Transceiver Module 902 → 928MHz, 2.1 → 3.6V

RS Stock No.: 136-6379Brand: MicrochipManufacturers Part No.: RN2903A-I/RM098
brand-logo
View all in RF Modules

Technical Document

Specifications

Module Type

Transceiver

Supported Frequency Bands

902 → 928MHz

Maximum Output Power

+18.5dBm

Receiver Sensitivity

-146dBm

Supported Bus Interfaces

UART

Supply Voltage

2.1 → 3.6V

Dimensions

26.7 x 17.8 x 3.34mm

Height

3.34mm

Length

26.7mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

17.78mm

Product details

RN2903 LoRa 915MHz RF Transceiver Module

The Microchip RN2903 is a low-power long range transceiver module based on wireless LoRa® technology. The module contains an integrated MCU, crystal, EUI-64 node identity, serial EEPROM, RF wireless transceiver with analogue front end and matching circuitry, and is fully-certified for 915 MHz wireless operation. A unique spread spectrum modulation process within the sub-GHz band is utilised to enable long range, low power, and high network capacity. When used with an external host MCU the RN2903 module is suitable for simple long-range sensor and IoT applications.

• On-board LoRaWAN™ Class A protocol stack
• FSK, GFSK, and LoRa® technology modulation
• ASCII command interface over UART
• Compact form factor 17.8 x 26.7 x 3 mm
• Castellated SMT pads for easy and reliable PCB mounting
• Single Operating Voltage: 2.1 to 3.6V (3.3V typical)
• Device Firmware Upgrade (DFU) over UART
• 14 GPIO for control, status, and ADC
• Environmentally friendly, RoHS compliant
• FCC and IC Certified

Wireless Modules - Microchip

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Microchip RN2903A-I/RM098 RF Transceiver Module 902 → 928MHz, 2.1 → 3.6V

P.O.A.

Microchip RN2903A-I/RM098 RF Transceiver Module 902 → 928MHz, 2.1 → 3.6V
Stock information temporarily unavailable.

Technical Document

Specifications

Module Type

Transceiver

Supported Frequency Bands

902 → 928MHz

Maximum Output Power

+18.5dBm

Receiver Sensitivity

-146dBm

Supported Bus Interfaces

UART

Supply Voltage

2.1 → 3.6V

Dimensions

26.7 x 17.8 x 3.34mm

Height

3.34mm

Length

26.7mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

17.78mm

Product details

RN2903 LoRa 915MHz RF Transceiver Module

The Microchip RN2903 is a low-power long range transceiver module based on wireless LoRa® technology. The module contains an integrated MCU, crystal, EUI-64 node identity, serial EEPROM, RF wireless transceiver with analogue front end and matching circuitry, and is fully-certified for 915 MHz wireless operation. A unique spread spectrum modulation process within the sub-GHz band is utilised to enable long range, low power, and high network capacity. When used with an external host MCU the RN2903 module is suitable for simple long-range sensor and IoT applications.

• On-board LoRaWAN™ Class A protocol stack
• FSK, GFSK, and LoRa® technology modulation
• ASCII command interface over UART
• Compact form factor 17.8 x 26.7 x 3 mm
• Castellated SMT pads for easy and reliable PCB mounting
• Single Operating Voltage: 2.1 to 3.6V (3.3V typical)
• Device Firmware Upgrade (DFU) over UART
• 14 GPIO for control, status, and ADC
• Environmentally friendly, RoHS compliant
• FCC and IC Certified

Wireless Modules - Microchip