Schneider Electric Preventa XPS MC Series Safety Controller, 32 Safety Inputs, 10 Safety Outputs, 24 V dc
Technical Document
Specifications
Brand
Schneider ElectricRange
Preventa
Series
XPS MC
Number of Safety Inputs
32
Number of Safety Outputs
10
Safety Category
4
SIL
SIL 3
Supply Voltage
24 V dc
Contact Current Rating
10 mA
IP Rating
IP20
Dimensions
151.5 x 74 x 153 mm
Depth
153mm
Length
151.5mm
Width
74mm
Product details
XPS MC, Configurable Safety Controllers, Base Units
Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs.
8 control inputs as standard
LEDs on the front face enable simple and visual diagnostics
Communication via Modbus
30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)
Required safety function can be selected after receipt of the product.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
Schneider ElectricRange
Preventa
Series
XPS MC
Number of Safety Inputs
32
Number of Safety Outputs
10
Safety Category
4
SIL
SIL 3
Supply Voltage
24 V dc
Contact Current Rating
10 mA
IP Rating
IP20
Dimensions
151.5 x 74 x 153 mm
Depth
153mm
Length
151.5mm
Width
74mm
Product details
XPS MC, Configurable Safety Controllers, Base Units
Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs.
8 control inputs as standard
LEDs on the front face enable simple and visual diagnostics
Communication via Modbus
30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)
Required safety function can be selected after receipt of the product.