SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

RS Stock No.: 131-1336Brand: SEGGERManufacturers Part No.: 8.07.01 SWD Isolator
brand-logo
View all in Development Tool Accessories

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 453.80

Each (Exc. Vat)

€ 535.48

Each (Including VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

1

Available in multiples of 1
1€ 453.80
2€ 907.60
3€ 1,361.40
4€ 1,815.20
5€ 2,269.00
6€ 2,722.80
7€ 3,176.60
8€ 3,630.40
9€ 4,084.20
10€ 4,538.00
11€ 4,991.80
12€ 5,445.60
13€ 5,899.40
14€ 6,353.20
15€ 6,807.00

€ 453.80

Each (Exc. Vat)

€ 535.48

Each (Including VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
Stock information temporarily unavailable.

1

Available in multiples of 1
1€ 453.80
2€ 907.60
3€ 1,361.40
4€ 1,815.20
5€ 2,269.00
6€ 2,722.80
7€ 3,176.60
8€ 3,630.40
9€ 4,084.20
10€ 4,538.00
11€ 4,991.80
12€ 5,445.60
13€ 5,899.40
14€ 6,353.20
15€ 6,807.00

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET