Microchip USB3343-CP, USB Transceiver, USB 2.0-OTG, 1.8 → 3.3 V, 24-Pin QFN

RS Stock No.: 893-8253PBrand: MicrochipManufacturers Part No.: USB3343-CP
brand-logo
View all in Home

Technical Document

Specifications

Number of Transceivers

1

Protocols Supported

USB 2.0-OTG

Power Supply Type

Single

ESD protection

Yes

Typical Single Supply Voltage

1.8 → 3.3 V

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

24

Dimensions

3.95 x 3.95 x 0.9mm

Height

0.9mm

Length

3.95mm

Maximum Operating Temperature

+85 °C

Width

3.95mm

Minimum Operating Temperature

-40 °C

Product details

USB334x Series USB 2.0 Transceivers

The USB334x family of devices from Microchip are Hi-Speed USB2.0 ULPI Transceivers that support USB-IF Battery Charging 1.2 (BC 1.2) specification.

Features

USB-IF Battery Charging 1.2 Specification Compliant
Link Power Management (LPM) Specification Compliant
Integrated ESD protection circuits – Up to ±25kV IEC Air Discharge without external devices
Over-Voltage Protection circuit (OVP) - protects the VBUS pin from continuous DC voltages up to 30V
Integrated USB Switch - USB3341, USB3346, and USB3347 models only
Microchip’s RapidCharge Anywhere™:
- 3-times the charging current through a USB port over traditional solutions
- USB-IF Battery Charging 1.2 compliance to any portable device
- Charging current up to 1.5Amps via compatible USB host or dedicated charger
- Dedicated Charging Port (DCP), Charging (CDP) & Standard (SDP) Downstream Port support
flexPWR® Technology - Extremely low current design ideal for battery powered applications
Single Power Supply Operation - Integrated 1.8V and 3.3V regulators
PHYBoost – Programmable USB transceiver drive strength for recovering signal integrity
VariSense™ - Programmable USB receiver sensitivity
“Wrapper-less” design for optimal timing performance and design ease
External Reference Clock operation available
Smart detection circuits allow identification of USB charger, headset, or data cable insertion
Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 2.0 specification
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
UART mode for non-USB serial data transfers
Internal 5V cable short-circuit protection of ID, DP and DM lines to VBUS or ground

USB (Universal Serial Bus) - Microchip

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Microchip USB3343-CP, USB Transceiver, USB 2.0-OTG, 1.8 → 3.3 V, 24-Pin QFN
Select packaging type

P.O.A.

Microchip USB3343-CP, USB Transceiver, USB 2.0-OTG, 1.8 → 3.3 V, 24-Pin QFN
Stock information temporarily unavailable.
Select packaging type

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Technical Document

Specifications

Number of Transceivers

1

Protocols Supported

USB 2.0-OTG

Power Supply Type

Single

ESD protection

Yes

Typical Single Supply Voltage

1.8 → 3.3 V

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

24

Dimensions

3.95 x 3.95 x 0.9mm

Height

0.9mm

Length

3.95mm

Maximum Operating Temperature

+85 °C

Width

3.95mm

Minimum Operating Temperature

-40 °C

Product details

USB334x Series USB 2.0 Transceivers

The USB334x family of devices from Microchip are Hi-Speed USB2.0 ULPI Transceivers that support USB-IF Battery Charging 1.2 (BC 1.2) specification.

Features

USB-IF Battery Charging 1.2 Specification Compliant
Link Power Management (LPM) Specification Compliant
Integrated ESD protection circuits – Up to ±25kV IEC Air Discharge without external devices
Over-Voltage Protection circuit (OVP) - protects the VBUS pin from continuous DC voltages up to 30V
Integrated USB Switch - USB3341, USB3346, and USB3347 models only
Microchip’s RapidCharge Anywhere™:
- 3-times the charging current through a USB port over traditional solutions
- USB-IF Battery Charging 1.2 compliance to any portable device
- Charging current up to 1.5Amps via compatible USB host or dedicated charger
- Dedicated Charging Port (DCP), Charging (CDP) & Standard (SDP) Downstream Port support
flexPWR® Technology - Extremely low current design ideal for battery powered applications
Single Power Supply Operation - Integrated 1.8V and 3.3V regulators
PHYBoost – Programmable USB transceiver drive strength for recovering signal integrity
VariSense™ - Programmable USB receiver sensitivity
“Wrapper-less” design for optimal timing performance and design ease
External Reference Clock operation available
Smart detection circuits allow identification of USB charger, headset, or data cable insertion
Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 2.0 specification
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
UART mode for non-USB serial data transfers
Internal 5V cable short-circuit protection of ID, DP and DM lines to VBUS or ground

USB (Universal Serial Bus) - Microchip